Booth Studio

Contacts.

Contacts are the people behind every inquiry and every booking. This guide covers adding them without duplicates, the contact page where their leads, events, messages and documents meet, and the list you work from.

What is a contact?

A contact is a person. They may belong to a company, and they may be attached to leads, events, documents and invoices - the contact record is where all of it meets, which is what makes “what is this relationship worth” answerable.

A contact carries a status - Lead, Prospect, Active Client, Past Client, Partner or Vendor - which describes the relationship, separately from any one inquiry or booking.

Creating contacts

  1. Open the wizard. Add Contact from the list, the quick actions or anywhere a person is being attached - the same wizard everywhere. Only a first name is required; the last name is optional, so a single-name person saves as they are. The top of the wizard shows your progress through its three steps: finished steps are ticked, any step you have already reached can be clicked to go back to it, and a step with something left to fix is marked in orange until it is fixed. On a phone, tap a segment of the progress bar to do the same.
  2. Let duplicate detection look. As you type, matching email, phone, or name plus company raises a warning saying why it matched, with the existing contact one click away.
  3. Decide, not the machine. If the duplicate is legitimate - two planners sharing an office line - you can continue anyway. The warning informs; it does not block.

Contacts also arrive by themselves, from the inquiry forms you publish under Forms. An inquiry is matched to an existing contact by email or phone; when nobody matches, a new contact is created with the name, email, phone, company and - when the form asks for it - the address the visitor gave. Sign-up forms work a little differently, and are covered next.

A form never changes a contact that already exists: anyone can type anyone’s email into a public form, and a stranger must not be able to rewrite a client’s record. When a matched contact’s email, phone, company, last name or address differs from what was sent, the difference is written on the new lead’s inquiry instead, for you to copy across if it is right.

Contacts from sign-up forms

A Contact sign-up form is for people who are not clients - white label vendors, suppliers, partners. Publish one under Forms and put it on your website like an inquiry form; every sign-up becomes a contact rather than a lead.

  • A new person becomes a new contact. With the name, email, phone, company, job title, website and address they gave, the role, status and tags the form sets in its settings - a vendor form starts as Supplier and Vendor - and their answers to your contact custom fields. Their message and any other answers go into a note on the contact.
  • Matched on email only. If the email already belongs to one of your contacts - archived ones included - nothing on that contact changes: no tags, no role, no blanks filled in. A note on their contact lists what the form said differently, their message and what the form would have set, for you to copy across if it is right.
  • Possible duplicates are named, not merged. A new sign-up whose phone number already belongs to someone else is still added as a new contact - offices and switchboards share numbers - and its note starts with “Possible duplicate of” that person, so you can check before merging. Nothing is written to the other contact.

Marketing permission works exactly as it does on inquiry forms - the Forms guide covers how it is recorded.

The contact page

The contact page opens with who they are - name, company and job title, status - and the figures that say where the relationship stands: lifetime value, the next event and when they were last contacted. Lifetime value counts completed events only - a booking next spring is not money earned yet - and says under the figure how many completed events it is across. Last contacted reads the conversation, so any email, text or call either way counts, and clicking it opens Messages. On a big monitor those sit beside who they are rather than under them. The owner is editable right in the header.

The owner is always someone on the team: a contact can only be given to a current teammate. When a teammate leaves - removed in Settings › Team & Crew, or deleting their account - the contacts they own, archived ones included, move to the teammate chosen to take over, and the change of owner is kept in each contact’s change history on Details.

The tabs stay at the top of the screen as you scroll, and the highlight slides to whichever section you open. On a phone the sections you open most sit in one row and the rest are under More; while one of those is open, More takes its name and the highlight rests there. From the keyboard, the arrow keys move between tabs and Enter opens one, so passing over Messages does not mark anything read.

  • Overview. Open opportunities and notes, with the upcoming event, what automations are doing for them and a Financial snapshot - what they have been invoiced to date (every booking billed, upcoming ones too, which is why it can be more than lifetime value), what that came to after costs and what the last job was priced at - in a column beside them on a laptop, and three columns on a big monitor. On a phone the header keeps two figures, lifetime value and the upcoming event, with one line under them saying what wants attention: overdue items (tasks past due on their bookings), no communication yet, or when they were last heard from.
  • Events and Financials. Every booking this person is on, and the invoices and payments behind the headline figures. On a phone or tablet each booking on Financials is one card, and a tap anywhere on it opens the event.
  • Documents, Attachments and Details. The paperwork raised for them, the files kept about them - dropped onto the Attachments box or picked from it, each named before it uploads, with a Preview that opens photos and PDFs in place - and the full record with its change history. The box lists the kinds and size of file it takes and says why it refused one.

A document your client has signed or submitted can’t be deleted from the Documents tab: Delete explains that it is kept with its copy and audit trail and offers Open document instead. Archiving it takes it off the tab.

Messages carries the reply box as well as the history, so an email or a text can be written from the page you are already reading. It is the same single thread you see in Messages - a person has one conversation, whichever screen you answer it from - and a contact who has never been messaged gets the box too, because the first message has to start somewhere.

When they write back, the Messages tab shows how many new messages are waiting, whichever tab you are on. Open it and the reply is there - new messages arrive on their own while the tab is open, so there is no need to reload the page - and the count clears, because you have now read them. Reloading the page keeps you on the tab you were on.

Call calls them from your computer, showing your business number - talk through your headset or your computer’s microphone, which your browser asks to use the first time. The call stays in a bar at the bottom of the screen while you look around, and it is recorded and saved to their conversation. A business with no number of its own yet gets the phone app on your device instead.

Details edits the way a lead page does: see something wrong, click it, change it, done. Hover any value for the pencil and click it - only that value becomes its input, the height of the line it replaces. Leaving it is what saves it: press anywhere else, or Tab on, and the change is saved, with a small check where the pencil was; Enter saves too, Escape puts the value back, and a value you only looked at closes as it was. Nothing else on the page moves. Clicking an email address or phone number edits it, so the small icon beside it is what starts the email or the call; websites and social profiles open the same way.

The Address & billing card carries a Same as contact address check in its heading: tick it and the contact address is copied into billing in one go, and from then on changing the address changes billing with it. Untick it and billing is cleared, ready to be clicked and given an address of its own; a billing address that matches the contact address reads as ticked.

On Details, the address and billing address look themselves up: start typing a street address and pick the match, and the city, province or state, postal code and country fill in beneath it. Every filled field stays editable, and typing the whole thing by hand works exactly as before.

Under Marketing consent in Communication preferences sits its proof: how the latest decision was made and when - “Given on the form ‘Website inquiry’”, through an unsubscribe link, or by someone on your team - and, under What they agreed to, the exact words and small print the person ticked, with any earlier decisions. A decision about an address that is no longer theirs says which address it was for. A box ticked with nothing on record says No record of how this was given. Consent given on a form, or withdrawn through an unsubscribe link, also appears in the record’s history.

One person editing at a time

Only one person can make changes to a contact at a time, so two people can never quietly write over each other. Opening a contact makes you its editor for as long as you have it open. If somebody else already has it open, you are asked straight away: Take over to edit it yourself, or Cancel to look without changing anything.

After Cancel the contact stays on screen with a banner saying who is editing it and since when, and everything that would change it is switched off. Messages, Documents, calling and starting a new lead for them still work - none of those edits the contact. The banner’s Take over is there whenever you need it, and the moment the other person leaves, the contact is yours to edit without reloading.

If somebody takes a contact over while you have it open, you are told who, and offered Take back or View only. Anything you were typing stays on screen, so taking it back lets you still save it. The same applies to you in two browser tabs: the contact can be changed in one of them at a time. Closing the contact, the tab or the laptop lets it go - within a minute and a half at most when the connection is simply lost.

Custom fields

Your business can keep its own questions about contacts - “Services offered”, “Coverage area” - as custom fields kept on Contacts. An Owner or an Admin makes them in the form editor, while building a Contact sign-up form. Each field is kept either on contacts or on leads and events, decided when it is made, so a vendor’s answers never turn up as empty rows on a wedding.

  • The Additional details card. On the Details tab, under Contact details. Every contact field that is not archived shows, empty ones as a dash, and each answer edits in place like the rest of the tab - one value at a time. The card is not shown at all while your business keeps no contact fields and this person holds no answers.
  • Filled by sign-up forms. A sign-up form fills them on the contact it creates. For someone who was already a contact, the answers go into the note instead, like every other difference.

Notes

  • Categorised and pinnable. Notes carry a category, and a pinned note stays at the top - the “always ask for the service elevator” note outlives the booking it was learned on.
  • Accountable. Notes say who wrote them and when, and can be edited or deleted. A note Booth Studio wrote itself - a sign-up form’s, say - reads System.

Roles on events

An event can carry several contacts, each with a role on that event - Primary Client, Billing Contact, Event Planner, Venue Contact and so on. A role is not a job title: the same person is an Events Director by trade and your Primary Client on this booking.

Roles are per event. The planner who is your primary client on one wedding can be the venue contact on another, and both records stay true.

Your own statuses and roles

The statuses and roles a contact can have are yours to set, in Settings → Contacts. Rename any of them - call Prospect “Lead” if that is your word - add your own, and delete the ones you never use. Every picker, filter and badge follows.

  • Renaming changes every contact at once. A contact keeps the status or role, not its name, so renaming one relabels everyone who has it. Nothing else changes.
  • Deleting one in use moves its contacts first. Delete a status or role that contacts still have and you choose where they go before it is removed. A role moves on their bookings too.
  • A few are kept. Prospect, Vendor and Archived, and Primary Client, Point of Contact and Other, can be renamed but not deleted - Booth Studio relies on them. A new contact starts as a Prospect, a vendor sign-up makes a Vendor, and Point of Contact is the person your crew see on the day.

The contacts list

  • A table you arrange. By default the columns are contact, company, email, status, the next event and when they were last contacted - the newest email, text or call that got through (a bounced email or a call that never rang does not count). The Last contacted sort orders by the same thing, with people never contacted at the end. Email is given the room to show an address in full before any other column grows; phone, owner and lifetime value join by themselves wherever the screen has room, and you can add the contact role or tags and drag columns into your order. Columns that do not fit are listed as “No room” - tick one and the table scrolls sideways with the name and the ••• pinned at its ends.
  • Pages that fit the screen. 25 contacts a page, or 50 on a tall screen, unless you pick your own number from Rows per page - which is remembered. The pager stays in view at the bottom of the window while you scroll. On a phone the list loads 20 at a time with Load more, and Filter & sort opens as one sheet: sort first, then status, contact role and archived contacts.
  • Preview beside the list. On a screen 1920px or wider, click a contact to see them beside the list - status and role, what wants attention, how to reach them, their next event and lifetime value, and their last few messages - with Email, Call and Text at the top. Up and Down move through the list, Escape closes it, and double-click, Enter or Open goes to the contact. The preview only reads: it never takes the contact from someone editing it, and it does not mark their messages as read.
  • Search and filters. Search by name, email, phone or company - typed as a whole name, “Jon Ohlsson” finds the person whose first name is one word and last name the other, and “ohlsson booth” finds them by name and company together. Filter by status; archived contacts stay out of the way until asked for.
  • Archive is not delete. Archiving hides a contact from active workflows while keeping the history: Include archived shows them again, and Unarchive puts them back. Deleting removes them.